Fimco 11/2

Fimco 11/2" 6 Zones Indexing Valve (4006)

Fimco 11/4

Fimco 11/4" 2 Zones Mini Indexing Valve (2002)

Fimco 11/4" 2 Zones Indexing Valve (3002)

Rating:
100% of 100
$51.23
SKU
150F2ZONE11/4

The FIMCO Hydro Indexing Valve is the modern, no worry way to ensure smooth working, dependable service for all sprinkler, wastewater and aquaponics systems. The Hydro-Indexing Valve is activated by sufficient water supply being turned on and off therefore no electrical wiring is required to the valve. All that is needed for a totally automatic system is a controller to turn on and off the water supply (pump or solenoid). The Hydro Indexing Valve operates under most all water conditions and is available in three styles to enable the valve to index properly under normal, low, or high water conditions. FIMCO Hydro Indexing Valves are preassembled with a sequencing cam depending on how many zones are on a particular sprinkler system. The cam can be easily removed and replaced by a different cam if sections are added or eliminated. FIMCO Hydro-Indexing Valves come in 7 series.

More Information
Manufacturer No
HP No
KW No
Phase No
Synchronous Speed No
Frequency No
Voltage No
Frame Material No
Frame Prefix No
Frame Size No
Frame Suffix No
XP Class and Group No
XP Division No
Product Style No
Nameplate Output No
Number of Poles N/A
Shaft Diameter No
Speed No
Wheel Diameter No
Wheel Bore Size No
Wheel Face No
Frame No
XP Class and Group No
Agency Approvals No
Ambient Temperature No
Auxillary Box No
Auxillary Box Lead Termination No
Base Indicator No
Bearing Grease Type No
Blower No
Current No
Design Code No
Drip Cover No
Duty Rating No
Efficiency @ 100% Load No
Electrically Isolated Bearing No
Feedback Device No
Front Face Code No
Front Shaft Indicator No
Heater Indicator No
High Voltage Full Load Amps No
Insulation Class No
Inverter Code No
KVA Code No
Lifting Lugs No
Locked Bearing Indicator No
Motor Lead Exit No
Motor Lead Quantity/Wire Size No
Motor Lead Termination No
Motor Standards No
Motor Type No
Power Factor No
Pulley End Bearing Type No
Pulley Face Code No
Pulley Shaft Indicator No
Rodent Screen No
Service Factor No
Shaft Extension Location No
Shaft Ground Indicator No
Shaft Rotation No
Shaft Slinger Indicator No
Speed Code No
Starting Method No
Thermal Device - Bearing No
Thermal Device - Winding No
Vibration Sensor Indicator No
Winding Thermal 1 No
Winding Thermal 1 Location No
RoHS Status No
Winding Thermal 2 No
XP Temp Code No
Armature Voltage No
Base Speed No
Field Voltage No
Armature Current No
Armature Inertia No
Field Winding Type No
Nameplate Speed No
Nameplate Voltage No
Peak Current No
Constant Stall Current No
Dimensional Drawing Numbers No
Feedback Signal No
Encoder No
Gear Ratio No
Gear Style No
Gearhead Type No
Output Speed No
Output Torque No
Capacitor Size No
Constant Torque Speed Range No
Max Speed No
Motor Finish No
Brake Torque No
No Load Current No
IP Rating No
PTC Thermistor Conn Diagram No
Enclosure Modification No
Enclosure No
Output @ Frequency No
Synchronous Speed @ Frequency No
Voltage @ Frequency No
Current @ Voltage No
Mounting Arrangement No
Efficiency @ 50% Load No
Efficiency @ 75% Load No
Rotor Inertia No
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account