Sprinkler Pump 11/2hp 115/230v 1 Ph C. Fiberglass Starite
Quick-priming PD pumps feature lightweight construction in a self-priming design. The 1 and 1-1/2 HP models offer a new, stronger pump body with reinforcement ribs and also a new 2" suction.
- - Quality Construction: Fiber glass reinforced thermoplastic provides total corrosion resistance and high resistance to sandy water.
- - Lightweight Design: Space-age materials make these pumps more portable than conventional cast iron pumps.
- - Composite Impeller: Highest performance and efficiency from ultra smooth materials Precision-Molded for perfect balance.
- - Easily Serviced: Normal wearing parts are easily accessible for service and replacement, without disturbing piping or mounting.
- - Dustproof Cover: Electrical components protected from dust and insects.
- - Heavy-Duty Motor: Heavy-duty1 through 2-1/2 HP motors. Designed for continuous operation. Stainless steel shaft.
- - Dual Voltage Capability: 1 and 1-1/2 HP motors have dual voltage motors and are shipped at the 230-volt setting. 2 and 2-1/2HP are 230-volt setting only.
| Manufacturer | No |
|---|---|
| HP | No |
| KW | No |
| Phase | No |
| Synchronous Speed | No |
| Frequency | No |
| Voltage | No |
| Frame Material | No |
| Frame Prefix | No |
| Frame Size | No |
| Frame Suffix | No |
| XP Class and Group | No |
| XP Division | No |
| Product Style | No |
| Nameplate Output | No |
| Number of Poles | N/A |
| Shaft Diameter | No |
| Speed | No |
| Wheel Diameter | No |
| Wheel Bore Size | No |
| Wheel Face | No |
| Frame | No |
| XP Class and Group | No |
| Agency Approvals | No |
| Ambient Temperature | No |
| Auxillary Box | No |
| Auxillary Box Lead Termination | No |
| Base Indicator | No |
| Bearing Grease Type | No |
| Blower | No |
| Current | No |
| Design Code | No |
| Drip Cover | No |
| Duty Rating | No |
| Efficiency @ 100% Load | No |
| Electrically Isolated Bearing | No |
| Feedback Device | No |
| Front Face Code | No |
| Front Shaft Indicator | No |
| Heater Indicator | No |
| High Voltage Full Load Amps | No |
| Insulation Class | No |
| Inverter Code | No |
| KVA Code | No |
| Lifting Lugs | No |
| Locked Bearing Indicator | No |
| Motor Lead Exit | No |
| Motor Lead Quantity/Wire Size | No |
| Motor Lead Termination | No |
| Motor Standards | No |
| Motor Type | No |
| Power Factor | No |
| Pulley End Bearing Type | No |
| Pulley Face Code | No |
| Pulley Shaft Indicator | No |
| Rodent Screen | No |
| Service Factor | No |
| Shaft Extension Location | No |
| Shaft Ground Indicator | No |
| Shaft Rotation | No |
| Shaft Slinger Indicator | No |
| Speed Code | No |
| Starting Method | No |
| Thermal Device - Bearing | No |
| Thermal Device - Winding | No |
| Vibration Sensor Indicator | No |
| Winding Thermal 1 | No |
| Winding Thermal 1 Location | No |
| RoHS Status | No |
| Winding Thermal 2 | No |
| XP Temp Code | No |
| Armature Voltage | No |
| Base Speed | No |
| Field Voltage | No |
| Armature Current | No |
| Armature Inertia | No |
| Field Winding Type | No |
| Nameplate Speed | No |
| Nameplate Voltage | No |
| Peak Current | No |
| Constant Stall Current | No |
| Dimensional Drawing Numbers | No |
| Feedback Signal | No |
| Encoder | No |
| Gear Ratio | No |
| Gear Style | No |
| Gearhead Type | No |
| Output Speed | No |
| Output Torque | No |
| Capacitor Size | No |
| Constant Torque Speed Range | No |
| Max Speed | No |
| Motor Finish | No |
| Brake Torque | No |
| No Load Current | No |
| IP Rating | No |
| PTC Thermistor Conn Diagram | No |
| Enclosure Modification | No |
| Enclosure | No |
| Output @ Frequency | No |
| Synchronous Speed @ Frequency | No |
| Voltage @ Frequency | No |
| Current @ Voltage | No |
| Mounting Arrangement | No |
| Efficiency @ 50% Load | No |
| Efficiency @ 75% Load | No |
| Rotor Inertia | No |
Write Your Own Review