SPRINKLER PUMP - 1 1/2 HP - 115/230V - IRON GOULDS GT15
Self-Priming Design
Once pump is primed, filled with water, it never needs priming again even if water level drops below the end of the suction pipe. Pumping resumes once the water level rises above the end of the suction pipe.
Serviceable
Back pullout design allows disassembly of pump for service without disturbing piping.Two compartment motor for easy access to motor wiring and replaceable components.
Diffuser (Guidevane)
Bolt down diffuser provides positive alignment with impeller. Diffuser has stainless wear ring for extended performance in abrasive conditions. F.D.A. compliant, injection molded, food grade, glass filled LexanÆ for durability and abrasion resistance.
Impeller
F.D.A. compliant, glass filled NorylÆ. Corrosion and abrasion resistant.
Corrosion Resistant
Electro-coat paint process is applied inside and out, then baked on.
Casing
Cast iron construction. Four (4) bolt, back pull-out design. Tapped openings provided for vacuum gauge and casing drain.
Powered for Continuous Operation
Pump ratings are within the motor manufacturer's recommended working limits. Can be operated continuously without damage.
Mechanical Seal
Carbon/ceramic faces, BUNA elastomers. 300 series stainless steel metal parts. Pump design prevents the seal from running dry.
| Manufacturer | No |
|---|---|
| HP | No |
| KW | No |
| Phase | No |
| Synchronous Speed | No |
| Frequency | No |
| Voltage | No |
| Frame Material | No |
| Frame Prefix | No |
| Frame Size | No |
| Frame Suffix | No |
| XP Class and Group | No |
| XP Division | No |
| Product Style | No |
| Nameplate Output | No |
| Number of Poles | N/A |
| Shaft Diameter | No |
| Speed | No |
| Wheel Diameter | No |
| Wheel Bore Size | No |
| Wheel Face | No |
| Frame | No |
| XP Class and Group | No |
| Agency Approvals | No |
| Ambient Temperature | No |
| Auxillary Box | No |
| Auxillary Box Lead Termination | No |
| Base Indicator | No |
| Bearing Grease Type | No |
| Blower | No |
| Current | No |
| Design Code | No |
| Drip Cover | No |
| Duty Rating | No |
| Efficiency @ 100% Load | No |
| Electrically Isolated Bearing | No |
| Feedback Device | No |
| Front Face Code | No |
| Front Shaft Indicator | No |
| Heater Indicator | No |
| High Voltage Full Load Amps | No |
| Insulation Class | No |
| Inverter Code | No |
| KVA Code | No |
| Lifting Lugs | No |
| Locked Bearing Indicator | No |
| Motor Lead Exit | No |
| Motor Lead Quantity/Wire Size | No |
| Motor Lead Termination | No |
| Motor Standards | No |
| Motor Type | No |
| Power Factor | No |
| Pulley End Bearing Type | No |
| Pulley Face Code | No |
| Pulley Shaft Indicator | No |
| Rodent Screen | No |
| Service Factor | No |
| Shaft Extension Location | No |
| Shaft Ground Indicator | No |
| Shaft Rotation | No |
| Shaft Slinger Indicator | No |
| Speed Code | No |
| Starting Method | No |
| Thermal Device - Bearing | No |
| Thermal Device - Winding | No |
| Vibration Sensor Indicator | No |
| Winding Thermal 1 | No |
| Winding Thermal 1 Location | No |
| RoHS Status | No |
| Winding Thermal 2 | No |
| XP Temp Code | No |
| Armature Voltage | No |
| Base Speed | No |
| Field Voltage | No |
| Armature Current | No |
| Armature Inertia | No |
| Field Winding Type | No |
| Nameplate Speed | No |
| Nameplate Voltage | No |
| Peak Current | No |
| Constant Stall Current | No |
| Dimensional Drawing Numbers | No |
| Feedback Signal | No |
| Encoder | No |
| Gear Ratio | No |
| Gear Style | No |
| Gearhead Type | No |
| Output Speed | No |
| Output Torque | No |
| Capacitor Size | No |
| Constant Torque Speed Range | No |
| Max Speed | No |
| Motor Finish | No |
| Brake Torque | No |
| No Load Current | No |
| IP Rating | No |
| PTC Thermistor Conn Diagram | No |
| Enclosure Modification | No |
| Enclosure | No |
| Output @ Frequency | No |
| Synchronous Speed @ Frequency | No |
| Voltage @ Frequency | No |
| Current @ Voltage | No |
| Mounting Arrangement | No |
| Efficiency @ 50% Load | No |
| Efficiency @ 75% Load | No |
| Rotor Inertia | No |