Rainbird 1" Economical Electric Valve With 24 V Coil (100dv)
Rain Bird manufactures only the highest quality valves. Use DV/DVF series valves in locations where the use of a separate pressure vacuum breaker (PVB) or a double-check valve is required by city codes to protect against back flow. Check your local city codes to determine what type of valves are required. All of our valves work with any standard sprinkler timer.
Double-filtered pilot-flow design for maximum reliability.
- - 3/4" (20/27) and 1" (26/34) standard in-line configuration. (26/34) Slip-by-Slip (SS) configuration for low cost, solvent-weld installations.
- - (26/34) Angle (A) configurations for flexible installations especially when submains are deep.
- - (26/34) Male-by-Male (MM) thread configuration for quick and easy manifolding.
- - (26/34) Male-by-Barb (MB) male thread inlet by barb outlet configuration for installation with poly pipe.
- - Unique, easy-to-turn patented pressure assisted flow control mechanism (DVF models only).
| Manufacturer | No |
|---|---|
| HP | No |
| KW | No |
| Phase | No |
| Synchronous Speed | No |
| Frequency | No |
| Voltage | No |
| Frame Material | No |
| Frame Prefix | No |
| Frame Size | No |
| Frame Suffix | No |
| XP Class and Group | No |
| XP Division | No |
| Product Style | No |
| Nameplate Output | No |
| Number of Poles | N/A |
| Shaft Diameter | No |
| Speed | No |
| Wheel Diameter | No |
| Wheel Bore Size | No |
| Wheel Face | No |
| Frame | No |
| XP Class and Group | No |
| Agency Approvals | No |
| Ambient Temperature | No |
| Auxillary Box | No |
| Auxillary Box Lead Termination | No |
| Base Indicator | No |
| Bearing Grease Type | No |
| Blower | No |
| Current | No |
| Design Code | No |
| Drip Cover | No |
| Duty Rating | No |
| Efficiency @ 100% Load | No |
| Electrically Isolated Bearing | No |
| Feedback Device | No |
| Front Face Code | No |
| Front Shaft Indicator | No |
| Heater Indicator | No |
| High Voltage Full Load Amps | No |
| Insulation Class | No |
| Inverter Code | No |
| KVA Code | No |
| Lifting Lugs | No |
| Locked Bearing Indicator | No |
| Motor Lead Exit | No |
| Motor Lead Quantity/Wire Size | No |
| Motor Lead Termination | No |
| Motor Standards | No |
| Motor Type | No |
| Power Factor | No |
| Pulley End Bearing Type | No |
| Pulley Face Code | No |
| Pulley Shaft Indicator | No |
| Rodent Screen | No |
| Service Factor | No |
| Shaft Extension Location | No |
| Shaft Ground Indicator | No |
| Shaft Rotation | No |
| Shaft Slinger Indicator | No |
| Speed Code | No |
| Starting Method | No |
| Thermal Device - Bearing | No |
| Thermal Device - Winding | No |
| Vibration Sensor Indicator | No |
| Winding Thermal 1 | No |
| Winding Thermal 1 Location | No |
| RoHS Status | No |
| Winding Thermal 2 | No |
| XP Temp Code | No |
| Armature Voltage | No |
| Base Speed | No |
| Field Voltage | No |
| Armature Current | No |
| Armature Inertia | No |
| Field Winding Type | No |
| Nameplate Speed | No |
| Nameplate Voltage | No |
| Peak Current | No |
| Constant Stall Current | No |
| Dimensional Drawing Numbers | No |
| Feedback Signal | No |
| Encoder | No |
| Gear Ratio | No |
| Gear Style | No |
| Gearhead Type | No |
| Output Speed | No |
| Output Torque | No |
| Capacitor Size | No |
| Constant Torque Speed Range | No |
| Max Speed | No |
| Motor Finish | No |
| Brake Torque | No |
| No Load Current | No |
| IP Rating | No |
| PTC Thermistor Conn Diagram | No |
| Enclosure Modification | No |
| Enclosure | No |
| Output @ Frequency | No |
| Synchronous Speed @ Frequency | No |
| Voltage @ Frequency | No |
| Current @ Voltage | No |
| Mounting Arrangement | No |
| Efficiency @ 50% Load | No |
| Efficiency @ 75% Load | No |
| Rotor Inertia | No |
Write Your Own Review