SPRINKLER PUMP - 1 1/2 HP - 115/230V - IRON GOULDS GT15

Sprinkler Pump - 1 1/2 Hp - 115/230v - Iron Goulds Gt15
[110SPUMPG1HHP]

Self-Priming Design

Once pump is primed, filled with water, it never needs priming again even if water level drops below the end of the suction pipe. Pumping resumes once the water level rises above the end of the suction pipe.

Serviceable

Back pullout design allows disassembly of pump for service without disturbing piping.Two compartment motor for easy access to motor wiring and replaceable components.

Diffuser (Guidevane)

Bolt down diffuser provides positive alignment with impeller. Diffuser has stainless wear ring for extended performance in abrasive conditions. F.D.A. compliant, injection molded, food grade, glass filled LexanÆ for durability and abrasion resistance.

Impeller

F.D.A. compliant, glass filled NorylÆ. Corrosion and abrasion resistant.

Corrosion Resistant

Electro-coat paint process is applied inside and out, then baked on.

Casing

Cast iron construction. Four (4) bolt, back pull-out design. Tapped openings provided for vacuum gauge and casing drain.

Powered for Continuous Operation

Pump ratings are within the motor manufacturer's recommended working limits. Can be operated continuously without damage.

Mechanical Seal

Carbon/ceramic faces, BUNA elastomers. 300 series stainless steel metal parts. Pump design prevents the seal from running dry.

$309.90309.90USD

Availability: In stock

Please call us at 954-981-7424 or email us at sales@acepumpandsupply.com for shipping cost!

   Pin it

Pump:

  • -Pipe connections: 1 1/2 NPT suction 1 1/2 NPT discharge
  • -Capacities: to 110 GPM at 5 foot suction lift.
  • -Heads: to 128 feet.
  • -Reprime capabilities: to 25 feet suction lift.
  • -Maximum working pressure: 125 PSIG.
  • -Maximum water temperature: 140_ F (60_ C).
  • -Rotation: clockwise when viewed from motor end.

Motor:

  • -NEMA standard open drip proof.
  • -60 Hz, 3500 RPM.
  • -Stainless steel shaft.
  • -Single phase: æ-1_ HP, 115/230 V; 2 and 3 HP, 230 V only. Built-in overload with automatic reset.
  • -Three phase: 230/460 V. Overload protection must be provided in starter unit. Starter and heaters (3) must be ordered separately.
  • -Optional TEFC motors are available.
Overall: 
     1 Review(s)  |   Add Your Review

Tony K Dunham -
This pump seems to be all that is claimed for it and so far is functioning very satisfactorily.