Fimco 11/4" 2 Zones Indexing Valve (3002)
The FIMCO Hydro Indexing Valve is the modern, no worry way to ensure smooth working, dependable service for all sprinkler, wastewater and aquaponics systems. The Hydro-Indexing Valve is activated by sufficient water supply being turned on and off therefore no electrical wiring is required to the valve. All that is needed for a totally automatic system is a controller to turn on and off the water supply (pump or solenoid). The Hydro Indexing Valve operates under most all water conditions and is available in three styles to enable the valve to index properly under normal, low, or high water conditions. FIMCO Hydro Indexing Valves are preassembled with a sequencing cam depending on how many zones are on a particular sprinkler system. The cam can be easily removed and replaced by a different cam if sections are added or eliminated. FIMCO Hydro-Indexing Valves come in 7 series.
| Manufacturer | No |
|---|---|
| HP | No |
| KW | No |
| Phase | No |
| Synchronous Speed | No |
| Frequency | No |
| Voltage | No |
| Frame Material | No |
| Frame Prefix | No |
| Frame Size | No |
| Frame Suffix | No |
| XP Class and Group | No |
| XP Division | No |
| Product Style | No |
| Nameplate Output | No |
| Number of Poles | N/A |
| Shaft Diameter | No |
| Speed | No |
| Wheel Diameter | No |
| Wheel Bore Size | No |
| Wheel Face | No |
| Frame | No |
| XP Class and Group | No |
| Agency Approvals | No |
| Ambient Temperature | No |
| Auxillary Box | No |
| Auxillary Box Lead Termination | No |
| Base Indicator | No |
| Bearing Grease Type | No |
| Blower | No |
| Current | No |
| Design Code | No |
| Drip Cover | No |
| Duty Rating | No |
| Efficiency @ 100% Load | No |
| Electrically Isolated Bearing | No |
| Feedback Device | No |
| Front Face Code | No |
| Front Shaft Indicator | No |
| Heater Indicator | No |
| High Voltage Full Load Amps | No |
| Insulation Class | No |
| Inverter Code | No |
| KVA Code | No |
| Lifting Lugs | No |
| Locked Bearing Indicator | No |
| Motor Lead Exit | No |
| Motor Lead Quantity/Wire Size | No |
| Motor Lead Termination | No |
| Motor Standards | No |
| Motor Type | No |
| Power Factor | No |
| Pulley End Bearing Type | No |
| Pulley Face Code | No |
| Pulley Shaft Indicator | No |
| Rodent Screen | No |
| Service Factor | No |
| Shaft Extension Location | No |
| Shaft Ground Indicator | No |
| Shaft Rotation | No |
| Shaft Slinger Indicator | No |
| Speed Code | No |
| Starting Method | No |
| Thermal Device - Bearing | No |
| Thermal Device - Winding | No |
| Vibration Sensor Indicator | No |
| Winding Thermal 1 | No |
| Winding Thermal 1 Location | No |
| RoHS Status | No |
| Winding Thermal 2 | No |
| XP Temp Code | No |
| Armature Voltage | No |
| Base Speed | No |
| Field Voltage | No |
| Armature Current | No |
| Armature Inertia | No |
| Field Winding Type | No |
| Nameplate Speed | No |
| Nameplate Voltage | No |
| Peak Current | No |
| Constant Stall Current | No |
| Dimensional Drawing Numbers | No |
| Feedback Signal | No |
| Encoder | No |
| Gear Ratio | No |
| Gear Style | No |
| Gearhead Type | No |
| Output Speed | No |
| Output Torque | No |
| Capacitor Size | No |
| Constant Torque Speed Range | No |
| Max Speed | No |
| Motor Finish | No |
| Brake Torque | No |
| No Load Current | No |
| IP Rating | No |
| PTC Thermistor Conn Diagram | No |
| Enclosure Modification | No |
| Enclosure | No |
| Output @ Frequency | No |
| Synchronous Speed @ Frequency | No |
| Voltage @ Frequency | No |
| Current @ Voltage | No |
| Mounting Arrangement | No |
| Efficiency @ 50% Load | No |
| Efficiency @ 75% Load | No |
| Rotor Inertia | No |