The CA15 In-Line Tank 2 Gal is an in-line water tank designed for use in irrigation and plumbing systems. The tank has a capacity of 2 gallons and is made of durable materials to withstand the demands of continuous use. The in-line design allows for easy installation and maintenance, and the compact size makes it suitable for use in tight spaces. The tank is designed to be used in conjunction with other irrigation or plumbing components to create a customized water distribution system. It can be used as a booster tank to increase water pressure or as a reservoir for holding a small amount of water. The CA15 In-Line Tank 2 Gal is suitable for residential and commercial use.
Manufacturer | No |
---|---|
HP | No |
KW | No |
Phase | No |
Synchronous Speed | No |
Frequency | No |
Voltage | No |
Frame Material | No |
Frame Prefix | No |
Frame Size | No |
Frame Suffix | No |
XP Class and Group | No |
XP Division | No |
Product Style | No |
Nameplate Output | No |
Number of Poles | N/A |
Shaft Diameter | No |
Speed | No |
Wheel Diameter | No |
Wheel Bore Size | No |
Wheel Face | No |
Frame | No |
XP Class and Group | No |
Agency Approvals | No |
Ambient Temperature | No |
Auxillary Box | No |
Auxillary Box Lead Termination | No |
Base Indicator | No |
Bearing Grease Type | No |
Blower | No |
Current | No |
Design Code | No |
Drip Cover | No |
Duty Rating | No |
Efficiency @ 100% Load | No |
Electrically Isolated Bearing | No |
Feedback Device | No |
Front Face Code | No |
Front Shaft Indicator | No |
Heater Indicator | No |
High Voltage Full Load Amps | No |
Insulation Class | No |
Inverter Code | No |
KVA Code | No |
Lifting Lugs | No |
Locked Bearing Indicator | No |
Motor Lead Exit | No |
Motor Lead Quantity/Wire Size | No |
Motor Lead Termination | No |
Motor Standards | No |
Motor Type | No |
Power Factor | No |
Pulley End Bearing Type | No |
Pulley Face Code | No |
Pulley Shaft Indicator | No |
Rodent Screen | No |
Service Factor | No |
Shaft Extension Location | No |
Shaft Ground Indicator | No |
Shaft Rotation | No |
Shaft Slinger Indicator | No |
Speed Code | No |
Starting Method | No |
Thermal Device - Bearing | No |
Thermal Device - Winding | No |
Vibration Sensor Indicator | No |
Winding Thermal 1 | No |
Winding Thermal 1 Location | No |
RoHS Status | No |
Winding Thermal 2 | No |
XP Temp Code | No |
Armature Voltage | No |
Base Speed | No |
Field Voltage | No |
Armature Current | No |
Armature Inertia | No |
Field Winding Type | No |
Nameplate Speed | No |
Nameplate Voltage | No |
Peak Current | No |
Constant Stall Current | No |
Dimensional Drawing Numbers | No |
Feedback Signal | No |
Encoder | No |
Gear Ratio | No |
Gear Style | No |
Gearhead Type | No |
Output Speed | No |
Output Torque | No |
Capacitor Size | No |
Constant Torque Speed Range | No |
Max Speed | No |
Motor Finish | No |
Brake Torque | No |
No Load Current | No |
IP Rating | No |
PTC Thermistor Conn Diagram | No |
Enclosure Modification | No |
Enclosure | No |
Output @ Frequency | No |
Synchronous Speed @ Frequency | No |
Voltage @ Frequency | No |
Current @ Voltage | No |
Mounting Arrangement | No |
Efficiency @ 50% Load | No |
Efficiency @ 75% Load | No |
Rotor Inertia | No |